The automatic edge banding machine includes the body, each processing department group and the control system. During operation, it is necessary to ensure that the edge banding strip and the end surface of the board are firmly and smoothly combined, and the joint between the sealed surface and other surfaces cannot be exposed or collapsed, and the transition is natural and smooth.

The sawed end face of the board in the panel furniture must be protected and beautified by the edge banding. The automatic linear edge banding machine is a device that seals the edge banding materials such as solid wood and PVC to the edge of the board. The equipment applies molten hot melt adhesive to the end face of the board, and then presses the edge sealing material on the board. The hot melt adhesive rapidly solidifies to form an adhesive force, which binds the edge sealing material to the board. After that, it is necessary to go through such links as end cutting, trimming, scraping, polishing, sanding, etc., so that the end face of the plate can be protected beautifully.

The fully automatic edge banding machine can make the board complete the procedures of gluing, edge sealing and gluing, front and rear truncating, upper and lower edge alignment, chamfering, scraping and sanding in one feeding process on the edge banding machine. Each feeding process can complete a straight edge operation. The continuity of each process is very strong, so the edge sealing efficiency is very high.