Production Introduction
The automatic linear edge banding machine is suitable for such plates: MDF, block board, solid wood board, particleboard, polymer door plates, plywood etc.
Model | GD-K720YF |
|
Panel Feed Speed(m/min) | 15m/min | |
Edge Thickness | 0.4-3mm | |
Edge Width | 10-50mm | |
Edge banding height | 12-60mm | |
Panel thickness | 8-30mm | |
Mini work Panel Width | > 80mm | |
Mini work Panel Length | >120 Mm | |
Heating power of plastic box | 1.5kw | |
Plate preheating power | 0.37KW | |
End cutting motor power | 0.55kw * 2 1200r / min200HZ | |
Transmission motor power | 2.2KW | |
Polishing motor power | 0.18kw*2 1400r / min 300Hz | |
Fine trimming motor power | 0.75kw*2 1800r / min 300Hz | |
Total power | 10kw | |
Air pressure | 0.9MPA | |
Machine weight | 2200KG | |
Machine size | 4500*900*1500mm |
Detailed Images
 | FunctionPre-millingPre milling is a customized function: in the first process when the plate enters the conveyor belt, double milling cutters are used to trim the edge collapse, ripple and burr caused by the cutting saw / cutting saw again, so as to achieve better edge sealing effect. Profiling trackingProfiling tracking is a custom function: it can repair fillets up and down, and round the four corners, making the end face of the plate more smooth and beautiful. The shape tracking device should be fast reaction and synchronous tracking, which has high requirements for mechanical appliances. |
| Polishing device Clean the processed plate with cotton polishing wheel, remove the excess glue stains, and make the edge section more smooth and tidy by polishing. Function can be added Fine trimming Edge scraping device The roughing tool is a 15 ° flat tool with 40-50 thread allowance for finishing. The automatic tracking and high-frequency high-speed motor are used to realize fast cutting. The finishing cutter is R2 oblique cutter, which leaves 5-6 wire margin for edge scraping. It adopts profiling automatic tracking and high-frequency motor to realize fast cutting, and R2 oblique cutter can trim radian. Profiling scraping is used to eliminate the secondary wave marks caused by the cutting process of non-linear movement of trimming, so as to make the upper and lower parts of the plate more smooth and tidy. At the same time, scraping can also adjust the size of the arc, so that the edge sealing effect is more perfect. |
| Taping Front and end cutting The glue pot is heated to melt the solid glue, and the screw structure is adopted to deliver glue, so that the glue can be evenly Applied on the board At the same time, the cylinder pressing wheel compresses the edge band and the plate to make the adhesion more firm, and there is no glue mark on the plate cotton From the front to the back, it is made by Taiwan Yadeke electromagnetic que, Taiwan Yadeke cylinder, and has a unique function of colliding with the plate. It is cut by a special saw blade to enhance the stability of the end |
Company Introduction
Hot Tags: automatic bander machines, China, suppliers, manufacturers, factory, price, wholesale, for sale, Edge Bander, Full Auto Edge Bander, PVC Edge Bander, Semi Auto Edge Bander, Automatic PVC Edge Bander, Automatic Edge Banding Machine
