How to maintain the vibration knife cutting machine？

The maintenance of vibration knife cutting machine is the key to ensuring its efficient operation and extending its service life. Here are some specific suggestions for maintenance of vibration knife cutting machines:

1、 Environmental requirements

Placement: The vibrating knife cutting machine should be placed in a place away from direct sunlight to prevent the table from cracking and affecting its service life. At the same time, the machine should operate in a dry and clean environment to avoid contamination from humid air or debris that could affect normal use.

Heavy object placement: Avoid placing heavy objects such as scissors, screwdrivers, etc. on the vibrating knife cutting machine to prevent damage caused by touching the machine head during startup.

2、 Daily cleaning and maintenance

Table cleaning: Regularly wipe the table of the vibrating knife cutting machine with alcohol to keep it clean and prevent blockage of the suction port. Be careful not to pour alcohol directly onto the countertop for wiping.

Machine tool and guide rail cleaning: The dirt on the machine tool and guide rail must be cleaned every working day to keep the bed clean. At the same time, regularly clean the oil stains on the drag board, guide rail, and guide rail drive screw, and add lubricating oil in a timely manner.

3、 Lubrication and Inspection

Lubrication: Regularly check whether there is lubricating oil on the horizontal and vertical guide rails and rack surfaces of the machine, and maintain good lubrication. In addition, regularly add oil to the spindle bearings of the vibrating knife to ensure its normal operation.

Component inspection:

Regularly inspect the belt and grinding wheel of the vibrating knife cutting machine for cracks. Once cracks are found, professional maintenance personnel should be notified immediately for handling.

Regularly check whether the horizontal and vertical rail wipers are working properly, and replace them in a timely manner if they are not working properly.

Regularly check whether the clamping block, steel strip, and guide wheel are loose, as well as the tightness of the steel strip, and adjust them if necessary.

Regularly check whether the bearings, gears, cooling hoods, and blades of the transmission part are flexible and intact, and add lubricating oil to the rotating parts.

4、 Computer system maintenance

The computer system of the vibrating knife cutting machine is directly related to whether it can operate normally. Therefore, regular maintenance, antivirus, and optimization of computer systems should be carried out to ensure their stability.

5、 Safe operation and personnel training

Safe operation: During the operation of the vibrating knife cutting machine, it is strictly prohibited to put hands near the running crossbeam and machine head to avoid accidents. At the same time, strictly follow the formal operating procedures when using the machine, and if you need to leave halfway during use, turn off the power to avoid danger caused by other personnel violating regulations.

Personnel training: Regularly provide professional technical training to operators to improve their operational skills and work quality. Operators must undergo professional training and be qualified before they can start working. Without the consent of technical personnel, they are not allowed to operate without authorization.

6、 Long term storage and maintenance

If the vibrating knife cutting machine is not used for a period of time, a layer of lithium should be applied to the moving parts of the blade and fixture, as well as some rust prone areas inside the machine, to ensure a smooth surface and prevent rusting.

In summary, the maintenance of vibration knife cutting machines involves multiple aspects such as environmental requirements, daily cleaning and maintenance, lubrication and inspection, computer system maintenance, safe operation and personnel training, as well as long-term storage and maintenance. Only by comprehensively carrying out these maintenance tasks can we ensure the efficient operation and extended service life of the vibrating knife cutting machine.