Function Introduction Of Automatic Edge Banding Machine.

The automatic edge banding machine is suitable for straight edge banding and trimming of medium density fiberboard, blockboard, solid wood board, particle board, polymer door panel, plywood, etc. It can have double-sided glue-coated edge banding and cutting edge banding at one time. The functions of pressing, flushing, chamfering, rough trimming, finishing trimming, scraping and polishing, etc., the sealing edge is fine, smooth, and feel good, and the sealing line is straight and smooth.

The equipment is stable, reliable, durable, and affordable. It is especially suitable for manufacturers of large and medium-sized furniture, cabinets and other panel furniture.

Introduction to the functions of each department and group of the automatic edge banding machine:

Pre-milling: Double milling cutters are used to re-modify the ripple marks, burrs or non-vertical phenomena caused by the panel saw/cutting saw processing to achieve a better edge banding effect. It makes the edge banding and the board fit more closely, and the integrity and aesthetics are better.

Glue-coated edge sealing: Through a special structure, the double-sided glue of the edge-sealing board and the edge-sealing material is evenly coated to ensure a stronger adhesion.

Straight head: through the precise linear guide movement, the automatic tracking of the model and the fast cutting structure of the high-frequency high-speed motor are adopted to ensure the smooth and smooth cut surface.

Finishing: The structure of automatic profiling and high-frequency high-speed motor is adopted to ensure the smoothness of the upper and lower parts of the trimmed board. It is used to repair and process the excess edge banding material above and below the edge band of the plate. The finishing knife is an R-shaped knife. Mainly used for PVC and acrylic edge banding of panel furniture, preferably edge banding with a thickness of 0.8mm or more.

Edge scraping: It is used to eliminate the ripple marks caused by the cutting process of the non-linear motion of the trimming, so that the upper and lower parts of the board are smoother and cleaner.

Polishing: Use a cotton polishing wheel to clean the processed plates, and polish the end face of the edge to be smoother.

Slotting: It is used to directly slot the side panels and bottom of the wardrobe, which reduces the process of panel sawing and is more convenient and quick; it can also be used to slot the aluminum edging of door panels.