How To Make The Film On The Surface Of The Wooden Door

The pre-coated type of machine lamination is a one-time molding. The consumables used have been coated with glue. The glue is melted by heating during the lamination, and then the film is bonded to the printed matter by pressure. This kind of laminating equipment is cheap, easy to operate, and does not generate harmful gases during operation. It is a trend in the development of laminating. In a society that pays more and more attention to environmental protection, it is believed that this kind of technology will one day replace the existing pre-coated film and become a domestic The main laminating technology in the printing industry. The disadvantage is that this kind of technology is not very mature in China, and there are still some problems to be solved, such as: single-sided film curling (there are single-sided anti-curling machines, but the price is relatively high), and the printed matter with silicone oil is difficult to cover.膜等。 Film and so on. It is widely used in short-run printing and digital fast printing industries.

The characteristic of the vacuum laminating machine is that the application of the vacuum laminating machine improves the working efficiency of the machine and guarantees the output; the worktable is driven by the power motor to enter and exit the heating box, automatic blister molding, automatic heating, and automatic pressure. The degree of automation is higher, and the operation is simpler and more convenient. The work surface of the machine body of the laminating machine is made of high-strength steel plate, which will not deform under high temperature, ensuring the flatness and stability of the workpiece. Vacuum pumps are generally well-known vacuum pumps, the air pressure can reach 30L/S, so that the air pressure in the working chamber can quickly reach the working pressure, and the ultimate pressure can reach -0.1MPa.

The motor that automatically enters and exits on the console uses a buffer device, and the large in and out speed can reach 3m/s. The heating power is large, and the heating power of 30KW can ensure continuous constant temperature heating, and the actual power consumption is only 6KW/H. The heating method of the laminating machine has been improved from the original electric heating to the radiating plate heating, so that the temperature difference of the material surface can be less than 5℃, and the surface smoothness of the laminated product can be greatly changed and improved without orange peeling. , Bubbles, etc., more suitable for the lamination of high-gloss film, matt film and skin-feeling film. The pressure gas tank of the laminating machine can make the air pressure in the laminating chamber quickly reach the rated air pressure, and rapid forming. The operation table of the vacuum laminating machine adopts a separate electric box, the operation is simpler and more direct, and the working status is easier to control. Even if there is a temporary failure, manual operation can be used without delaying production. The application of vacuum laminating machine has promoted the development of the processing industry, improved production efficiency, and brought good benefits to manufacturers.