More Popular Upgraded Sliding Table Saw

Composition of sliding table saw:

1. Rack; 2. Main saw part; 3. Slot saw part; 4. Transverse guide baffle; 5. Fixed workbench; 6. Sliding sliding sliding table; 7. Inclined saw guide plate; 8. Bracket; 9. Angle display device of diagonal saw; 10. Lateral guide baffle.

The main structural feature of the sliding table saw is the use of two saw blades, namely, the main saw blade and the marking saw blade. When cutting, the scribe saw shall cut in advance, and the groove with depth of 1 ~ 2mm and width of 0.1 ~ 0.2mm thicker than the main saw blade shall be cut on the bottom surface of the processed plate, so as to ensure that the edge of the saw mouth will not be torn during cutting of the main saw blade, so as to obtain good sawing quality. The diameter of the scribing saw blade is small, usually about 120mm, and is driven by a separate motor. The rotating speed of the saw blade is generally above 9000r / min, and the cutting speed is generally 56 ~ 60m / s. The scribing saw blade shall be aligned with the main saw blade in the same vertical plane. Diameter of main saw blade & 8943; It is generally 300 ~ 400mm and is driven by the main motor through V-belt. According to the different diameter of the main saw blade and the type of processed plate, the main saw blade can be changed by using the tower wheel. The tower wheel has simple speed change structure and belongs to constant power output, which is more in line with the actual needs of wood processing. The power of the main motor is generally 4 ~ 9kw. In order to make the speed regulation simple, special V-belt is adopted to ensure that a single belt can meet the transmission of required power. The rotating speed of the main saw blade is generally 3000 ~ 6000r / min, and the spacing between the main saw blade and the marking saw blade is generally about 100mm.

Another main structural feature of the sliding table saw is that the marking saw blade and the main saw blade are fixed, and the moving worktable made of aluminum profile containing the processed plates is pushed back and forth by hand to realize sawing. Due to the special structure of the guide rail of the mobile worktable, it is light and labor-saving when manually pushing and feeding, and the machining accuracy is very high.

The bed of the sliding table saw is mostly welded from steel plate with a thickness of 5 ~ 6mm, which is stable and beautiful, and can ensure that its early sawing processing does not produce inclination and distortion. The fixed worktable is fixed on the top of the bed. The cast parts of Sichuan are required to be flat and not deformed, and are equipped with longitudinal cutting guide plate and its adjustment mechanism.