Reduced Version Of Automatic Edge Banding Machine.

This machine is suitable for straight-line edge banding and trimming of medium density fiberboard, blockboard, solid wood board, particleboard, polymer door board and plywood. It can be equipped with double-sided adhesive edge banding, cutting edge banding, bonding and pressing, trimming, chamfering, rough trimming and fine trimming at one time

Scraping and polishing, fine and smooth edge sealing, good hand feeling, straight and smooth sealing line. The equipment has the advantages of stable operation, reliability, durability and moderate price. It is especially suitable for manufacturers of large and medium-sized furniture, cabinets and other panel furniture.

Function introduction of each department and group:

1. Pre milling: double milling cutters are used to modify the ripple marks, burrs or non vertical phenomena caused by cutting board saw / cutting saw, so as to achieve better edge sealing effect. It makes the edge banding strip fit more closely with the plate, and has better integrity and aesthetics.

2. Gluing and edge sealing: through the special structure, the double-sided gluing of edge sealing plate and edge sealing material is uniform to ensure more firm adhesion.

3. Trimming: through precise linear guide rail movement, automatic profiling tracking and high-frequency high-speed motor fast cutting structure are adopted to ensure that the cutting section is flat and smooth.

4. Finishing: all adopt profiling automatic tracking and high-frequency high-speed motor structure to ensure the flatness and smoothness of the upper and lower parts of the trimmed plate. It is used to repair the excess edge sealing materials above and below the processing plate edge sealing strip. The finishing knife is an R-shaped knife. It is mainly used for PVC and acrylic edge banding of panel furniture, and the edge banding with a thickness of more than 0.8mm is preferred.

5. Edge scraping: it is used to eliminate the ripple marks caused by the cutting process of trimming non-linear movement, so as to make the upper and lower parts of the plate more smooth and tidy.

6. Polishing: clean the processed plate with a cotton polishing wheel, and polish the edge sealing end face to make it smoother.

7. Slotting: used for direct slotting of wardrobe side plate and bottom plate to reduce the process of panel saw and make it more convenient and fast; It can also be used for slotting the aluminum edge of door panel.

More machines are waiting for you to purchase!