Win Or Lost?

1.Pay attention to the function of the engraving machine, the engraving motor of the engraving machine has high power and low power. Some engraving machines with low power are only suitable for the processing of materials such as two-color boards, architectural models, small signs, three-dimensional crafts, etc. This process has been popular for some time, but the engraving power is too small and its application range is greatly affected. The other is an engraving machine with a high-power engraving head. This engraving machine is divided into two categories. One is a large-format cutting machine: the format is generally more than one meter, but the accuracy of this engraving machine is generally poor; the other type It is an engraving machine with a moderate format: this kind of engraving machine is generally used for fine processing and organic sign production.

2. To understand the performance and function of the engraving motor, the engraving head motor of the engraving machine is also very important, and the engraving head motor works continuously for a long time, so if the engraving head motor is not good, it will also affect the use of the engraving machine.

3. In addition, the speed adjustable range of the engraving head motor, the general speed adjustable range is several thousand to 30,000 revolutions per minute, if the speed is not adjustable or the speed adjustable range is small, then the application range of the engraving machine is Subject to great restrictions, because different materials must be engraved with different engraving head speeds.

4. Engraving machine body manufacturing process: The body must be precise and stable when the high-power engraving machine works. Therefore, the casting body should be used for long-term high-power engraving to ensure its processing accuracy and stability.

5. Controllers are generally divided into two categories: the first type of controller is only for driving, and all its calculation work is completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot perform typesetting work. The other type of controller is controlled by a single-board computer or a single-chip computer. This controller is actually a computer, so as long as the engraving machine starts to work, the computer can immediately perform other typesetting work, especially when engraving for a long time. The advantages are particularly obvious.

6. The screw rod and guide rail are also an important part of the engraving machine. A good screw rod and guide rail are the guarantee of the accuracy and performance of the engraving machine when it is used for a long time.

Hi,Calling me,if you want to buy our machine!

Why???

Because.... I am salesgirl,hahaha

Wish you a fresh day!Bye~

Kaise Ellen